Fender Super Head Owner Manual - Page 6
Tubes, Vinyl, Troubleshooter's, Checklist
View all Fender Super Head manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
LINE CORD This amplifier is equipped with a grounding type supply cord to reduce the possibility of leakage current. Be sure to connect it to a grounded receptacle. Operation from an ungrounded (two pronged) AC receptacle requires a three to two contact grounding adaptor. Be sure to connect the adaptor's grounding lead to a good earth ground. DO NOT ALTER THE AC PLUG. TUBES The tube complement in all versions of the SUPER amp, consists of two Fender Special Design 6L6-GC's (PN 023556), two Fender Special Design 7025's (PN 013341), and one Fender Special Design 12AT7 (PN 023531). Fender's Special Design electronic tubes provide optimum performance in this amplifier. For best results, replace with Fender original equipment tubes only. VINYL CARE The exclusive Fender vinyl covering on your cabinet has been especially designed for years of lasting beauty. A very light soapy solution on a sponge may be used to remove dirt and residue that may accumulate in the grain. Be careful not to let any liquid come in contact with operating surfaces. DO NOT have the amplifier plugged into the power outlet when cleaning. TROUBLESHOOTER'S CHECKLIST: If the amp is set up but does not function, check the following items: -Is the amp power cord properly plugged into an electrical outlet? - Is there power at the outlet? -Is the primary fuse blown? -Is the speaker properly connected to the amplifier? -Is the amp on standby? -Are all the control knobs turned up above four? -Is the volume control on the instrument turned up? -Is your instrument properly plugged into the amplifier? (Eliminate any effect pedals and try another guitar cord.) If, after checking all of the above, the system is still not performaing correctly, consult your Fender Service Dealer.