Fender Super-Sonic 22 Combo Owners Manual - Page 7

7

Rear Panel

Specifications

L°

POWER±

Switches the unit ON-OFF. You can extend the

life of

the amplifier tubes by keeping the STANDBY {M} switch down

for the first 60 seconds that the power is ON.

M°

STANDB´

°

In standby, the amplifier outputs are disabled

while power is supplied only to the tube filaments, keeping

them warm.

*Tip:

Use STANDBY instead of switching the power

off during short breaks to extend the life of the tubes and

avoid the tube warm-up delay upon returning to play.

N°

IEC POWER INPUT SOCKET±

Connect to a grounded outlet

using the supplied power cord in accordance with the voltage

and frequency specified on the rear panel of your amplifier.

O°

FUSE±

Protects the amplifier from electrical faults. Only

replace a blown fuse with the type and rating specified on the

rear panel of your amplifier.

P°

MAIN SPEAKER / EXTENSION SPEAKER±

�±²³´±µ¶·······³¸²³´±µ¶

A speaker MUST be plugged into the INTERNAL SPEAKER

jack when the Super–Sonic amplifier is ON or damage may

occur. Switch the amplifier OFF, or to STANDBY while chang-

ing speaker connections.

•

Keep the internal speaker connected to the INTERNAL SPEAKER

jack for normal operation.

Q°

FOOTSWITCH±

Connect the included 4-button footswitch to

enable remote selection of: Amp Voicing, Channel, FX Loop

Bypass and Reverb. NOTE:

The front panel pushbuttons are dis-

abled when the footswitch is connected.

R°

SEND / RETURN±

Effects loop jacks. Connect SEND to your

effects input and connect RETURN to the effects output.

TYPE:

PR 904

PART NUMBERS:

2160000x00* (120V, 60Hz)

2160001x00* (110V, 60Hz) TW

2160003x00* (240V, 50Hz) AUS

2160004x00* (230V, 50Hz) UK

2160005x00* (220V, 50Hz) ARG

2160006x00* (230V, 50Hz) EUR

2160007x00* (100V, 50Hz) JPN

2160009x00* (220V, 60Hz) ROK

*(Super-Sonic 22 amplifier exterior color code:

Black "x"=0, Blonde "x"=4)

POWER REQUIREMENT:

120W

POWER AMP OUTPUT:

22W RMS @ 5% THD, 1kHz sine into 8Ω

INPUT IMPEDANCE:

1MΩ

OUTPUT IMPEDANCE:

8Ω

FUSES

100V-120V UNITS:

F 2A L, 250V

220V-240V UNITS:

F 1A L, 250V

FOOTSWITCH (INCLUDED):

4-button, (P/N 0078324000) Voicing / Channel / FX on-off / Reverb

SPEAKERS:

One 8Ω, 12" Fender Special Design speaker by Eminence® (P/N 0079527000)

DIMENSIONS:

HEIGHT:

17.5 in (44.5 cm)

WIDTH:

24 in (61.0 cm)

DEPTH

:

8.5 in (21.6 cm)

WEIGHT

:

40 lb (18.1 kg)

Product specifications are subject to change without notice.

Fender Super-Sonic 22 Combo Owners Manual - Page 7

Rear Panel, Specifications - weight

Page 7 highlights