Fender Vibro Champ Owner Manual - Page 7
Panel, Functions, Corrective, Check - speaker
View all Fender Vibro Champ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
REAR PANEL FUNCTIONS Caution - To reduce the risk of fire, replace only with same type 1 amp. 125 volt Slo Blo fuse. CARE OF VINYL COVERING If the vinyl covering and handles require cleaning, use a mild soap and warm water solution, wipe with a damp cloth, and buff dry with a terry cloth. This will restore the original luster. SPEAKER JACK Connects speaker to amplifier. CORRECTIVE CHECK LIST If your amp is set up but does not function, check the following items: . Is the amp power supply cable plugged into the wall? . Is there power at the wall outlet where the amp is plugged in? . Is the speaker plugged into the amplifier speaker jack? . Are the tone control knobs turned up above 4? . Is the volume control on your instrument turned up? . Is the fuse good? If, after checking all of the above, the system is still not performing correctly, consult your Fender Service Dealer. REPLACEMENT PARTS Under the terms of the limited warranty, defective parts will be replaced by your authorized Fender dealer. Fender Original Equipment tubes and parts are designed and built to provide optimum performance in musical instrument amplifiers. To maintain best performance and quiet operation, replacement should be made with original equipment tubes from your authorized Fender Dealer. Fender Musical Instruments furnishes warranty service through authorized Fender dealers.