Fisher and Paykel DD24DCTX9 N Installation Guide - Page 22

2 PARTS SUPPLIED Drain hose support (1) Drain hose joiner (1) Wire clip (1) (for securing Drain hose joiner) Clamp (1) (for securing Drain hose joiner) Side mounting bracket kit (A and B) (2) OPTIONAL Top mounting brackets (2) OPTIONAL Phillips 5/8" (16mm) screws (7) 1 1/2" (38mm) bottom fixing screws & metal washers (2) Rubber washer for inlet hose (1) (comes already fitted) Moisture protection tape (1) (to prevent moisture damage to cabinetry) Cavity Bracket Kit (1) (supplied with Fisher & Paykel Tall Height Models only) Dishdrawer installation overview This video provides an overview of what is needed to install a DishDrawer™. It is intended as an overview only of the installation process and is not intended to be used as a guide on how to install a DishDrawer™ yourself. https://vimeo.com/325297597 Edge Protector (1) (If the services hole is through a metal partition, the hole must be protected with the Edge Protector supplied to prevent damage to the power cord or hoses.) If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 11' 10" (3.6m). The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com 2