Fisher and Paykel DD24DTI7 QUICK START PH7 INT TXT AA US (English) - Page 2

After the wash The dishwasher will beep six times to indicate the end of the wash program. You may notice the following noises at the end of the wash. These are all part of normal operation: In double models, both drawers may be draining simultaneously. The drying fan may continue to run after a wash program has finished for a set time. The fan assists with drying and uses negligible amounts of energy. For best drying results, we recommend unloading the dishes once they have cooled. Dos and don'ts of loading Sharp or pointed items must be placed horizontally or with sharp edges/points facing down to avoid risk of injury. Protruding items will stop the internal lid of the drawer from sealing properly, which could result in a service call. A neatly arranged load with evenly spaced dishes helps wash performance. Overcrowding reduces wash performance. Ensure there is enough space between plates. Mix spoons, knives and forks within the cutlery basket to prevent them from nesting. Ensure that water reaches all items on the adjustable racks. If plates and cutlery are nesting, they are less likely to be cleaned well. Dishware is blocking water from reaching items on the adjustable racks. Closed Drawer autolock using the remote control The Closed Drawer autolock feature will lock the dishwasher when the drawer is closed. To enable this feature - with the drawer closed (and no wash program or delay start is active), press and hold on the remote for 6 seconds until you hear a sequence of 4 beeps together. Ignore any beeps prior to the 6 seconds. The drawer is now locked. To unlock, press once. You will hear a sequence of 4 beeps together. The drawer is now unlocked. On double products, the drawers must be locked independently. If the power to the dishwasher is disconnected, the drawer will remain locked. Note: this feature is highly recommended if the dishwasher is to be used in motor homes. Preference options You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable settings before you start using your dishwasher. Option Rinse aid Water softener* Beeps at end of wash What does it do? Regulates the amount of rinse aid dispensed. Reduce this setting if there is excess foam after a wash. Increase this setting if dishes are wet or streaky after a wash. Refer to the 'Water softener' section of the 'User guide' for details. How to change the setting of an option Your dishwasher is factory-set to beep six times at the end of a wash. You can turn this setting off. 1 CHECK & OPEN Check that there is no wash underway, then open the drawer. 2 ENTER MENU & SCROLL TO OPTION To enter the menu: press first with one finger, then with another finger, hold both until one long beep sounds, then release. You are now in the Rinse aid option of the preference options menu. If you want to change the Rinse aid setting, go to step 3 now. If you want to change the setting of another option, you will need to scroll to that option first. To scroll to the next option: press . To know which option you're in, keep track of the sequence of options using the table below. When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone). Option Possible settings Example Rinse aid 1 to 5 4 indicators lit = setting is 4 Water softener* 0 to 5 3 indicators lit = setting is 3 Beeps at end of wash On/Off On Off 3 CHANGE SETTING Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2, you need to press 3 times. 4 SAVE SETTING & QUIT MENU Press and hold until a beep sounds and the control panel reverts to showing the wash program currently selected. *This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted. For more info For detailed information on the features of your dishwasher see your 'User guide' For warranty information see your 'Service and warranty' booklet If you... have any questions or comments need a Fisher & Paykel authorized technician to service your product need replacement parts or accessories want to register your product see your 'Service and warranty' booklet or contact us NZ toll-free, 24/7 AU toll-free, 24/7 USA toll-free, 24/7 CA toll-free, 24/7 0800 372 273 1300 650 590 1 888 936 7872 1 888 936 7872 www.fisherpaykel.co.nz www.fisherpaykel.com.au www.fisherpaykel.com www.fisherpaykel.ca 590194C 09.12