Fisher and Paykel DD24SI7 BOOK USER DISHDRAWER PH7 (EN) (English) - Page 29

To replace the filter plate and spray arm, The filter plate must not be able to move about freely.

Get Fisher and Paykel DD24SI7 PDF manuals and user guides View all Fisher and Paykel DD24SI7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

User maintenance instructions - DD24/DD60 models 25 To replace the filter plate and spray arm 8 Before replacing the filter plate, ensure the O-ring is correctly positioned on the base, as shown. O-ring 9 Orientate the filter plate and lower it into place: make sure its kidney-shaped hole aligns with the matching recess in the dishwasher base. 10 Ensure the filter plate lies flat in the base, then lock it into position: turn the outer ring clockwise until the the marks align with each other and all three pin pairs firmly interlock, as shown. Important! The filter plate must not be able to move about freely. Alignment marks 10 9 Interlocking pin Outer ring 11 Replace the drain filter, ensuring it is flush with the filter plate. 12 Replace the spray arm back onto the impeller. 12 11 13 Replace the base rack, lowering its front edge into position first. 14 Plug the dishwasher back in or turn it on at the power supply. Note: Where there is broken crockery or glass in the drawer, it must be carefully removed to prevent damage to the dishwasher.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
25
To replace the filter plate and spray arm
8
Before replacing the filter
plate, ensure the O-ring is correctly
positioned on the base, as shown.
9
Orientate the filter plate and lower it into place:
make sure its kidney-shaped hole aligns with
the matching recess in the dishwasher base.
10
Ensure the filter plate lies flat in the base, then
lock it into position: turn the outer ring clockwise
until the the marks align with each other and all three pin pairs firmly interlock, as shown.
Important!
The filter plate must not be able to move about freely.
11
Replace the drain filter, ensuring it is flush with the filter plate.
12
Replace the spray arm back onto the impeller.
13
Replace the base rack, lowering its front edge into position first.
14
Plug the dishwasher back in or turn it on at the power supply.
Note: Where there is broken crockery or glass in the drawer, it must be carefully removed to
prevent damage to the dishwasher.
O-ring
Inter-
locking
pin
Outer ring
Alignment marks
9
10
11
12
User maintenance instructions -
DD24/DD60 models