Fisher and Paykel DD605FD User Guide - Page 31
Troubleshooting
View all Fisher and Paykel DD605FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Troubleshooting 29 US CA Problem Unclean dishes Foaming Water leaking DishDrawer® will not open Power failure during cycle. Possible Cause What to do Wash program unsuitable for the load. Spray arm unable to rotate. DishDrawer® overloaded/ incorrectly loaded. Refer to the wash programs section for a suitable wash program, or the soils were too heavily baked on and dishes may need soaking. Ensure no items are obstructing the spray arm path. Refer to the section on loading. Filter plate/drain filter is incorrectly inserted. Refer to the 'User maintenance instructions' section. Detergent put in the wrong compartment. Excess food not removed from dinnerware prior to loading. Detergent must be placed in the large compartment. Scrape all food scraps off dinnerware prior to loading. Unsuitable detergent. Use recommended brands of dishwasher detergent. Not enough detergent. Refer to the detergent section or the detergent manufacturer's instructions. Spray arm holes are blocked. Clean the spray arm. Filter plate/drain filter is blocked. Mega rack incorrectly installed. Insufficient salt in the water softener (DD605H or DS605H). Incorrect amount of detergent. Too much egg in the wash load. Rinse agent setting too high. Drain hose disconnected from waste pipe. Supply inlet hose not properly connected. Other leaks. Childlock function is on or the Closed Drawer option is on, or both. Clean the filter plate and drain filter. Refer to the accessories section for correct installation. Ensure there is enough salt in the water softener and/or increase the water softener setting. Refer to the detergent section or consult the detergent manufacturer's instructions. Increase the amount of detergent. Decrease the rinse agent setting. Reconnect the drain hose to the waste pipe. Ensure the inlet hose is connected securely. Turn water and power supplies to the DishDrawer® off. Call your dealer or Authorized Service Agent. Turn Lock off. Hold down the / / button until the / symbol disappears from the LCD screen or the light above the / / button disappears and/or press the button to open the DishDrawer®. Wait until power resumes, cycle will restart in same part of wash program.