Fisher and Paykel DD60DCX6 User Guide - Page 38
Fault codes, Possible causes, What to
View all Fisher and Paykel DD60DCX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
36 Fault codes Fault codes U1 U4 Possible causes Fill fault due to... What to do Check if there is water in the DishDrawer and follow the relevant steps below. ...water supply not being turned on. OR ...spray arm not being fitted correctly. Fault in the other drawer preventing the use of this drawer. If there is no water in the DishDrawer: 1 Turn on the water supply to the DishDrawer. 2 Plug the DishDrawer back in or turn it on at the power supply. If there is water in the DishDrawer: 1 Plug the DishDrawer back in or turn it on at the power supply. 2 Press the button and wait for 30 seconds. 3 Press the / button. The DishDrawer will automatically drain (approx. 2 minutes). You may need to repeat steps 2 and 3 again. 4 When the DishDrawer is empty, check that the spray arm is correctly fitted and can rotate freely. See 'User maintenance instructions'. Check other drawer, attend to fault code on that drawer.