Fisher and Paykel DE08 User Guide - Page 5

Reversible Door Instructions - dryer

Get Fisher and Paykel DE08 PDF manuals and user guides View all Fisher and Paykel DE08 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Reversible Door Instructions REVERSIBLE DOOR INSTRUCTIONS These instructions are for changing the hinges from the right side to the left side. Tools Needed Standard #2 Phillips screwdriver DRYER DOOR 1. Open the door and remove the filler plugs opposite the hinges. (A tape-tipped putty knife or a needle-nosed plier will help to remove the plugs. Be careful not to damage the paint.) If you need to change the hinges from the left side to the right side, follow these same instructions (merely reverse all references to the left and right). 6. Rotate the door 180˚. Insert it on the opposite door frame by moving the door IN and DOWN until the top hinge and the bottom hinge are resting on the top screws inserted in step 3. 2. With the door completely open, remove the bottom screw attaching each hinge to the dryer front. (Do not remove the screws located on the door itself). 3. Insert these screws about half way into the top holes, for each hinge, on the opposite side (where you removed the filler plugs). 4. Loosen the remaining top screw from each hinge on the dryer front, half way. 5. With one hand holding the top of the door, and the other hand holding the bottom, remove the door from the dryer front by lifting it UP and OUT. 7. With the other screws, secure each hinge at the bottom. 8. Tighten the top screws of each hinge. 9. Reinsert the plastic plugs on the side from which the door was removed. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
REVERSIBLE DOOR INSTRUCTIONS
These instructions are for changing the hinges from the
right side to the left side.
If you need to change the hinges from the left side to
the right side, follow these same instructions (merely
reverse all references to the left and right).
Tools Needed
Standard #2 Phillips screwdriver
DRYER DOOR
1.
Open the door and remove the filler plugs opposite the
hinges.
(A tape-tipped putty knife
or a needle-nosed plier
will help to remove the
plugs. Be careful not to
damage the paint.)
2.
With the door completely
open, remove the bottom
screw attaching each hinge
to the dryer front. (Do not
remove the screws located
on the door itself).
3.
Insert these screws about half way into the top holes,
for each hinge, on the opposite side (where you
removed the filler plugs).
4.
Loosen the remaining top screw
from each hinge on the dryer front,
half way.
5.
With one hand holding
the top of the door, and
the other hand holding
the bottom, remove the
door from the dryer
front by lifting it UP
and OUT.
6.
Rotate the door 180˚.
Insert it on the opposite
door frame by moving the
door IN and DOWN until
the top hinge and the
bottom hinge are resting on
the top screws inserted in
step 3.
7.
With the other screws, secure
each hinge at the bottom.
8.
Tighten the top screws of each
hinge.
9.
Reinsert the plastic plugs on the side from which the
door was removed.
5
Reversible Door Instructions