Fisher and Paykel DE4024P1 Installation Guide - Page 36
wet at end
![]() |
View all Fisher and Paykel DE4024P1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
TROUBLESHOOTING PROBLEM Greasy spots on clothes. Lint on clothes. Static occurs. Collars and waistbands still wet at end of cycle. Slight variation in metallic color. Dryer continues to tumble. POSSIBLE CAUSES Improper use of fabric softener. Drying dirty items with clean ones. Clothes were not completely clean. Lint filter is full. Improper sorting. Static electricity can attract lint. Overloading. Paper, tissue, etc, left in pockets. No fabric softener was used. Overdrying. Synthetics, permanent press and blends can cause static. The dryness monitor senses that the body of the clothes is dry. This is normal. 'Wrinkle Free', 'Extra' was selected. WHAT TO DO Follow directions on fabric softener package. Use your dryer to dry only clean items. Dirty items can stain clean items and the dryer. Sometimes stains which cannot be seen when the clothes are wet appear after drying. Use proper washing procedures before drying. Clean lint screen before each load. Sort lint producers (like chenille) from lint collectors (like corduroy). See suggestions in this section under 'Static occurs'. Separate large loads into smaller ones. Empty all pockets before laundering clothes. Try a recommended fabric softener. Try a recommended fabric softener. Adjust setting to a lower dryness level. Try a recommended fabric softener. Choose 'Time Dry' to dry damp collars and waistbands. In the future, when drying a load with collars and waistbands, choose a higher dryness level. Due to the metallic properties of paint used for this unique product, slight variations of color may occur due to viewing angles and lighting conditions. Ensure 'Wrinkle Free', 'Extra' option is not selected. 34
![](/manual_guide/products/fisher-paykel-de4024p1-installation-guide-4b29ffc/36.png)