Fisher and Paykel DE7027G1 User Guide - Page 45

Check the position of the hinge as shown

Get Fisher and Paykel DE7027G1 PDF manuals and user guides View all Fisher and Paykel DE7027G1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Installation instructions 43 8 Reattach the hinges on the opposite side to the door handle, using the same four screws on the hinge retained from removing the hinges in Step 5. Important! Fig.38 Fixing hinges to opposite side Check the position of the hinge as shown in Figure 38. 9 To change the direction of the door strikes, unscrew both the cover plate and the strike plate (the strike plate being the plate with the metal part protruding). Reinstall one plate in place of the other. Fig.39 Exchanging cover plate and strike plate location 10 Install the door on the opposite side of the opening by moving the door in and down until the top hinge and bottom hinge are resting on the two screws inserted in Step 3. With the two screws retained in Step 4, secure each hinge at the bottom. Fig.40 Installing the door in the reverse position 11 Tighten the two top screws of each hinge.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
43
Installation instructions
8
Reattach the hinges on the opposite side to the door handle, using the same four screws on the
hinge retained from removing the hinges in Step 5.
Fig.38 Fixing hinges to opposite side
Important!
Check the position of the hinge as shown in Figure 38.
9
To change the direction of the door strikes, unscrew both the cover plate and the strike plate
(the strike plate being the plate with the metal part protruding). Reinstall one plate in place of
the other.
Fig.39 Exchanging cover plate and strike plate location
10
Install the door on the opposite side of the opening by moving the door in and down until the
top hinge and bottom hinge are resting on the two screws inserted in Step 3. With the two
screws retained in Step 4, secure each hinge at the bottom.
Fig.40 Installing the door in the reverse position
11
Tighten the two top screws of each hinge.