Fisher and Paykel DE7027J1 User Guide - Page 42
Ensure you DO NOT OVERTIGHTEN the connections. Overtightening may result in damage to the, couplings
![]() |
View all Fisher and Paykel DE7027J1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
40 Installation instructions 4 Check that the washer inlet hose (which has been removed from the faucet) has a flat washer or filter washer fitted. If not insert a flat washer and connect the hose to one of the male couplings on the "Y" connector. 5 Take the long inlet hose and insert a flat washer into the straight female coupling and connect it to the other male coupling on the "Y" connector. 6 Insert a flat rubber washer into the other female connector and couple the hose to the inlet valve on the rear of the dryer. Fig.32 Attaching the inlet hose to the dryer 7 Check that all connections are firmly hand tight, then using a pair of pliers tighten each coupling another two-thirds of a turn. Important! Ensure you DO NOT OVERTIGHTEN the connections. Overtightening may result in damage to the couplings. Fig.33 Tightening the connections 8 Check immediately for any leaks from the "Y" connector, hose couplings and/or the faucet. Check again for leaks after 24 hours.
![](/manual_guide/products/fisher-paykel-dg7027p1-user-guide-e481bac/42.png)