Fisher and Paykel DE70FA1 DE08/09 DE70 Electric Dryer Install (English) - Page 5

AdditionalInstallation Instructions If all rigid metal duct cannot be used, then flexible all metal venting can be used, but it will reduce the maximum recommended duct length. In special installations when it is impossible to make a connection with the above recommendations, then UL listed clothes dryer transition duct may be used as transition venting between the dryer and wall connection only. The use of this ducting will affect dry time. If flexible transition duct is necessary, only UL listed duct identified for use with clothes dryers is approved. The following directions must be followed. • Use the Shortest Length Possible. • Stretch the Duct to its Maximum Length. • Do Not Crush or Collapse. • Never Use Transition Duct Inside the Wall, or Inside the Dryer. • Avoid Resting the Duct on Sharp Objects. • Venting Must Conform to Local Building Codes. DO CORRECT DO CORRECT DO CORRECT DON'T DON'T DON'T INCORRECT INCORRECT INCORRECT NEVER USE PLASTIC OR OTHER COMBUSTIBLE DUCTWORK SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5