Fisher and Paykel DG62T27DW1 AeroSmart LED Models Installation Instructions &a - Page 26
For 4-wire connections by power cords, For 4-wire connections by direct wiring
View all Fisher and Paykel DG62T27DW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
24 Installation instructions Electrical connections (electric models only) For 4-wire connections by power cords 4-wire power supply cord must have four 10 AWG copper wires and match a 4-wire receptacle of NMEA Type 14-30R. The fourth wire (ground conductor) must be identified by a green cover and the neutral wire by a white cover. For 4-wire connections by direct wiring ¾" UL-listed strain relief to disconnect box 10-gauge, 3-wire with ground wire (Romex) 4 ¼" 1" of wires stripped of insulation Strip 4 ¼" of outer covering from end of cable. Strip insulation back 1". NEUTRAL wire (white or center) Shape ends of wire into a hook. bare ground wire Fig.22 Wiring 4-wire connections
24
Installation instructions
Electrical connections (electric models only)
For 4-wire connections by power cords
4-wire power supply cord must have four 10 AWG copper wires and match a 4-wire receptacle
of NMEA Type 14-30R. The fourth wire (ground conductor) must be identified by a green cover
and the neutral wire by a white cover.
For 4-wire connections by direct wiring
Fig.22 Wiring 4-wire connections
¾” UL-listed
strain relief
to disconnect
box
10-gauge, 3-wire with
ground wire (Romex)
bare ground wire
NEUTRAL wire
(white or center)
1” of wires
stripped of
insulation
4 ¼”
Strip 4 ¼” of outer covering from end of
cable. Strip insulation back 1”.
Shape ends of wire
into a hook.