Fisher and Paykel DS605ZW User Guide - Page 30
Cleaning the spray arm and filter plate
View all Fisher and Paykel DS605ZW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
USCA 28 User maintenance instructions Cleaning the spray arm and filter plate Ensure the DishDrawer® is cool before you start cleaning and follow the instructions for removing the drain filter and spray arm. 1 Remove the basket carefully. Lift from the back end first to prevent knocking the detergent and rinse agent dispenser. 2 Lift the spray arm and shake any foreign material out. Rinse the spray arm clean under running water and wipe the with a damp cloth. 3 In the center of the filter plate there are two rings. Hold the center ring still and turn the outer ring counter-clockwise, about a 1/8 turn. This will release the filter plate. 4 Lift the filter plate out. When cleaning the underside of the filter plate, take care handling the sharp outer edge to avoid the risk of cuts. Remove any foreign material, wash in hot soapy water and rinse thoroughly in clean water. The heater plate can be wiped with a damp cloth. 5 Replace the filter plate so it lies flat in the base of the drawer ensuring the filter plate is fully locked into position with the center ring. 6 To lock the filter plate into position, ensure the lines align with each other (refer to the diagram for the correct position). The filter plate must not be able to move about freely. 7 Replace the spray arm back onto the impeller. 8 Replace the basket, lowering the front edge of the basket into position first. Note: Where there is broken crockery or glass in the drawer, it must be carefully removed to prevent damage to the DishDrawer®. 1 2 1 3 4 a b c d Correct locking position of filter plate with motor assembly (under spray arm) a Outer Ring b Impeller c Correct Alignment marks d Center Ring