Fisher and Paykel FAULTY User Guide - Page 28
Cleaning the spray arm and filter plate
View all Fisher and Paykel FAULTY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
24 User maintenance instructions - DD24/DD60 models Cleaning the spray arm and filter plate To remove and clean the spray arm and filter plate 1 Unplug the dishwasher or turn it off at the power 2 1 supply. 2 Unclip the glass supports (if fitted) from the rack 3 wires and fold all the adjustable racks away, so that they are upright and close to the top. 3 Remove the base rack carefully. Lift from the back end first to prevent knocking the detergent and rinse aid dispenser. 4 Lift the spray arm and shake any foreign material out. Rinse it clean under running water and wipe with a damp cloth. 5 Lift and remove the drain filter. 4 5 6 In the centre of the filter plate there are two rings. Turn the outer ring anticlockwise, about a 1/8 turn. This will release the filter plate. 7 Lift the filter plate out. Remove any foreign material, wash in hot soapy water and rinse thoroughly in clean water, then wipe with a damp cloth. Take care handling the sharp outer edge of the filter plate. 6 7 Turn outer ring 1/8 turn