Fisher and Paykel HC24DTXB2 User Guide - Page 21

Cleaning And Maintenance

Page 21 highlights

CLEANING AND MAINTENANCE EN WARNING! Unplug or disconnect the appliance from the power supply before servicing or cleaning. IMPORTANT! ●● Never use abrasive or oil based cleaners. ●● Wear gloves to protect against sharp edges. Maintenance The ventilation hood should be cleaned regularly using a mild, liquid detergent and a clean soft cloth to avoid a build-up of grease occurring. Avoid the use of corrosive chemicals, abrasive cleaning products, hard brushes and steel wool pads. Grease deposits are corrosive which can cause damage to your ventilation hood. Note: in areas of high humidity or coastal environments, cleaning should be carried out more frequently. Aluminum filters ●● Depending on use, and at least once a month, the aluminum filters should be removed and cleaned with hot soapy water or in a dishwasher. ●● If washed in a dishwasher, the filter should be placed in an upright position to prevent food from falling on them. ●● After rinsing and drying, refit the filters. Note: some discoloration of the frames may occur. Removing the aluminum filters: 1 Pull the relative catch, tilting the filter downwards until it disengages from the supports. 2 Reverse these instructions when refitting the filters. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

19
CLEANING AND MAINTENANCE
WARNING!
Unplug or disconnect the appliance from the power supply before servicing or cleaning.
IMPORTANT!
±
Never use abrasive or oil based cleaners.
±
Wear gloves to protect against sharp edges.
Maintenance
The ventilation hood should be cleaned regularly using a mild, liquid detergent and
a clean soft cloth to avoid a build-up of grease occurring. Avoid the use of corrosive
chemicals, abrasive cleaning products, hard brushes and steel wool pads. Grease
deposits are corrosive which can cause damage to your ventilation hood.
Note: in areas of high humidity or coastal environments, cleaning should be carried out
more frequently.
Aluminum filters
±
Depending on use, and at least once a month, the aluminum filters should
be removed and cleaned with hot soapy water or in a dishwasher.
±
If washed in a dishwasher, the filter should be placed in an upright position to
prevent food from falling on them.
±
After rinsing and drying, refit the filters.
Note: some discoloration of the frames may occur.
Removing the aluminum filters:
1
Pull the relative catch, tilting the filter
downwards until it disengages from the
supports.
2
Reverse these instructions when refitting
the filters.
EN