Fisher and Paykel OM24NDTDX1 Data Sheet Convection Speed Oven - Page 2

d i Hk G POWER OUTLET LOCATION l PLAN VIEW B 596 FRONT VIEW c DATUM : FRONT OF CHASSIS p j A 458 m n o p DATUM : FRONT OF CHASSIS DATA SHEET Convection Speed Oven, 24" Model no: OM24NDTDX1, OM24NDLX1 (refer page 1 for imperial measurements) Product Dimensions a Overall height of oven B Overall width of oven c Overall depth of oven (excludes handle and front metal trim) d Depth of oven frame, control panel and door (excludes handle and front metal trim) E Depth of chassis (includes terminal block) F Height of chassis G Width of chassis H Height from bottom datum to top of oven door i Height of control panel J Height of metal cap on control panel K Height from bottom datum to centerline of handle L Width of handle M Depth of handle (measured from front of door) N Thickness of handle O Distance from bottom datum to bottom of door glass P Depth of door when open (measured from front of door) mm 458 596 565 20 545 435 556 347 100 20 324 565 42 16 12 320 E 545 F PROFILE VIEW DATUM : BOTTOM OF CHASSIS VENTILATION Minimum Clearances Minimum inside height of cavity Minimum inside width of cavity Minimum inside depth of cavity Overall height of cabinetry (cavity around front frame) Overall width of cabinetry (cavity around front frame) Rear ventilation air vent depth* Rear ventilation air vent width* mm 440 560 550 460 600 50 560 * A rear ventilation air vent totalling 44in2 (280cm2) is required. The air vent must be located at the rear of the cabinet, it can be positioned at the base, sides, back or top of the cavity. IMPORTANT NOTE: For full installation and clearance details please refer to the installation guide. INDICATES PRODUCT DATUM INDICATES CABINETRY CLEARANCES DATE: 02.09.2022 IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16''). Please read the installation manual for detailed information on installing the product. For full installation instructions & specifications visit fisherpaykel.com