Fisher and Paykel OR30SDG6X1 User Guide - Page 66

Alert Code, Possible Causes, What To

Get Fisher and Paykel OR30SDG6X1 PDF manuals and user guides View all Fisher and Paykel OR30SDG6X1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

ALERT CODES ALERT CODE A1 POSSIBLE CAUSES The oven has overheated. Door lock error: the door cannot be locked after you have started a A2 Self Clean cycle. Door lock error: the door cannot be A3 unlocked after a Self Clean cycle has finished. Technical fault. F2 F + number WHAT TO DO 1 Allow the oven to cool down. 2 Once the oven has cooled down and the door has unlocked, the alert code will disappear. You can now use the oven again. 1 Turn the power to the oven off at the wall and on again. 2 Wait approximately 10 seconds. This is to allow the door lock to return to its initial position. 3 Set the clock. See 'Setting the clock and first use' for instructions. 4 Try starting a Self Clean cycle again, making sure that you close the door firmly. See 'Using the Self Clean function'. 1 Turn the power to the oven off at the wall and on again. 2 Try touching on the oven door to help the door lock disengage. 3 If this doesn't help and the alert code reappears, call your Fisher & Paykel trained and supported service technician or Customer Care. 1 Note down the alert code. 2 Wait until the cooling fans have stopped and the oven has completely cooled down. 3 Turn the power to the oven off at the wall. 4 Call your Fisher & Paykel trained and supported service technician or Customer Care with the alert code information. 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
64
ALERT CODES
ALERT CODE
POSSIBLE CAUSES
WHAT TO DO
The oven has overheated.
1
Allow the oven to cool down.
2
Once the oven has cooled down
and the door has unlocked, the alert
code will disappear. You can now use
the oven again.
Door lock error:
the door cannot be locked
after you have started a
Self Clean cycle.
1
Turn the power to the oven off at the
wall and on again.
2
Wait approximately 10 seconds.
This is to allow the door lock to return
to its initial position.
3
Set the clock. See ‘Setting the clock
and first use’ for instructions.
4
Try starting a Self Clean cycle again,
making sure that you close the door
firmly. See ‘Using the Self Clean
function’.
Door lock error:
the door cannot be
unlocked after a Self Clean
cycle has finished.
1
Turn the power to the oven off at the
wall and on again.
2
Try touching on the oven door to help
the door lock disengage.
3
If this doesn’t help and the alert code
reappears, call your Fisher & Paykel
trained and supported service
technician or Customer Care.
F + number
Technical fault.
1
Note down the alert code.
2
Wait until the cooling fans have
stopped and the oven has completely
cooled down.
3
Turn the power to the oven off at
the wall.
4
Call your Fisher & Paykel trained
and supported service technician or
Customer Care with the alert code
information.
A1
A2
A±
F2