Fisher and Paykel OR36SCI6X1 Installation Guide - Page 4

SAFETY AND WARNINGS WARNING! To avoid hazard, follow these instructions carefully before installing or using this appliance. zz Save these instructions for the local inspectors use. zz Please make this information available to the person installing the appliance - doing so could reduce your installation costs. zz This range is to be installed and connected to the electricity supply only by an authorized person. zz If the installation requires alterations to the domestic electrical system, call a qualified electrician. The electrician should also check that the socket cable section is suitable for the electricity drawn by the range. zz Service should only be done by authorized technicians. Technicians must disconnect the power supply before servicing this appliance. zz The range must be grounded. zz Installation must comply with your local building and electricity regulations. zz This appliance must be installed and connected to the mains power supply only by a suitably qualified person according to these installation instructions and in compliance with any applicable local building and electricity regulations. zz The manufacturer accepts no responsibility for the incorrect installation of appliances. Incorrect installation may result in personal injury, damage to property and may invalidate any warranty or liability claims zz Do not modify this appliance. zz Do not use or store flammable materials on or near this appliance zz If the power supply cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. zz A circuit breaker is recommended. zz Do not use adaptors, reducers or branching devices to connect the oven to the mains electricity supply, as they can cause overheating and burning. zz Improper installation, adjustment alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before using, installing or servicing this appliance. zz The appliance must not be installed behind a decorative door in order to avoid overheating. zz A risk of the appliance tipping over exists if the appliance is not installed in accordance with installation instructions. zz DO NOT obstruct the flow of ventilation air to the appliance. Be sure a fresh air supply is available. zz Check local building codes for the proper method of range installation. Local codes vary. zz Installation, electrical connections, and grounding must comply with all applicable codes. zz In the absence of local codes, the range should be installed in accordance with the latest edition of National Electrical Code ANSI/NFPA 70. zz In Canada: Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes. zz Some models are supplied with a protective film on steel and aluminum parts. This film must be removed before installing/using the appliance. zz Packing elements (eg plastic bags, polystyrene foam, staples, packing straps etc) and tools should not be left around during and after installation, especially if they are within easy reach of children, as these may cause serious injuries. zz Make sure you recycle the packaging material. zz Before disposing of any appliance, make sure that it can no longer be used and that all hazardous parts are removed or made harmless, so that children playing with the old appliance cannot harm themselves. GENERAL INSTALLATION INFORMATION Cleaning and servicing zz Service should only be performed by an authorized/qualified technician. zz Disconnect the electrical supply to the appliance before servicing. zz When removing appliance for cleaning and/or service: zz Disconnect AC power supply. zz Carefully remove the range by pulling outward. zz The misuse of oven door (eg stepping, sitting, or leaning on them) can result in potential hazards and/or injuries. zz When installing or removing the range for service, a rolling lift jack should be used. Do not push against any of the edges of the range in an attempt to slide it into or out of the installation. Pushing or pulling a range (rather than using a lift jack) also increases the possibility of bending the leg spindles or the internal coupling connectors. IMPORTANT! zz Range is heavy; use care in handling. zz Do not lift the range by the oven door handle or hob rail, or by lifting the cooktop trim as this may damage the appliance. Replacement parts Only authorized replacement parts may be used in performing service on the range. Replacement parts are available from factory authorized parts distributors. Contact the nearest parts distributor in your area. IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website www.fisherpaykel.com or contact your local Fisher & Paykel dealer. 4