Fisher and Paykel WA3927G1 User Guide - Page 9
Important
View all Fisher and Paykel WA3927G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installation instructions 7 US CA Water supply ■■ This washer must be plumbed into both a hot and cold water supply or it will not work correctly. Please ensure that both hot and cold water are connected to the washer. ■■ If you have an uncontrolled water-heating source (eg a wet back or solar heating) you should have a tempering device fitted. This will ensure the hot water temperature remains within safe limits. For the most suitable type of tempering device we recommend you contact a local plumber or plumbing supply merchant. ■■ Inlet water static pressure: Min. 5psi (34kPa) to Max. 150psi (1MPa) is required. ■■ Minimum flow rate from the faucet supplying the clothes washer should be greater than 1 ½ gallons/min (6 liters/min) (assumes ½" (12.7 mm) diameter pipes). Note: your washer does not have an internal water heater to heat water. Draining ■■ Regularly check that your standpipe or tub/sink is free from lint or other obstructions, which may affect how your washer works or may cause flooding. ■■ In multi-storey apartments or any upper floor, the washer should be installed on floor equipped with a drain. ■■ Draining must comply with local by-laws. Important! If you are using an extension cord or a portable electrical outlet device (eg multi-socket outlet box), ensure that it is positioned so that it does not come into contact with water or moisture. Accessories and spare parts Available from your Fisher & Paykel Dealer or Authorized Service Center. Drain Hose Extension Part No. 425627p Power Cord If the Power Cord of your clothes washer is damaged it must be replaced by a Fisher & Paykel Authorized Service Agent, as it is not a standard power cord.