Fluke 116-NIST Fluke 116 Users Manual - Page 14
Measuring AC and DC Current
View all Fluke 116-NIST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
116 Users Manual Measuring AC and DC Current WWarning To avoid personal injury or damage to the Meter: • Never attempt to make an in-circuit current measurement when the opencircuit potential to earth is > 600 V. • Use the proper switch position and range for your measurement. Flame sensor probe Control Module eeo08f.eps To measure flame rectification circuits: 1. Turn the function switch to $. 2. Connect the Meter between the flame sensor probe and the control module. 3. Turn heating unit on and record μA measurement. 12
116
Users Manual
12
Measuring AC and DC Current
W
Warning
To avoid personal injury or damage to the
Meter:
•
Never attempt to make an in-circuit
current measurement when the open-
circuit potential to earth is
>
600 V.
•
Use the proper switch position and range
for your measurement.
Flame
sensor
probe
Control
Module
eeo08f.eps
To measure flame rectification circuits:
1.
Turn the function switch to
$
.
2.
Connect the Meter between the flame sensor probe and
the control module.
3.
Turn heating unit on and record
μ
A measurement.