Fluke 789 Calibration Manual - Page 9

Introduction  Warning The information provided in this manual is for the use of qualified personnel only. Do not perform the calibration verification tests or calibration procedures described in this manual unless you are qualified to do so.  Caution The 789 ProcessMeter™ contains parts that can be damaged by static discharge. No procedure in this document requires the case to be opened. If you do so, follow the standard practices for handling static sensitive devices. The Calibration Manual for the 789 ProcessMeter (hereafter, also referred to as "the ProcessMeter" or "the UUT") provides the following information: • Precautions and Safety information • Specifications • Basic maintenance (cleaning, replacing the batteries and fuses) • Calibration verification test procedures • Calibration adjustment procedures • Accessories and replaceable parts For complete operating instructions, refer to the 789 ProcessMeter Users Manual (on the CD-ROM provided). How to Contact Fluke To contact Fluke, call one of the following telephone numbers: • Technical Support USA: 1-800-44-FLUKE (1-800-443-5853) • Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853) • Canada: 1-800-36-FLUKE (1-800-363-5853) • Europe: +31 402-675-200 • Japan: +81-3-6714-3114 • Singapore: +65-6799-5566 • Anywhere in the world: +1-425-446-5500 Or, visit Fluke's website at www.fluke.com. To register your product, visit http://register.fluke.com. To view, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals. Safety Information A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies conditions and procedures that can cause damage to the Product or the equipment under test. International symbols used on the Meter and in this manual are explained in Table 1. 1