Fluke BT520 Product Manual - Page 4

BT520 Users Manual Edit a Profile 3-5 Edit a Profile During Creation 3-5 Modify a Profile During Measurement 3-5 Load a Profile 3-5 Load a Profile When Switched to Sequence Mode 3-6 Load a Profile During Measurement in Sequence Mode 3-6 Make Measurements 3-7 Test Battery Internal Resistance and Voltage or Strap Resistance... 3-7 Battery Test Probes 3-8 View Test Readings on the Screen 3-9 Measure Strap resistance in sequence mode 3-9 Set Measurement Range 3-10 Save Battery Test Readings 3-10 Erase Test Readings 3-10 Activate Low-Pass Filter for Resistance Measurement 3-10 Set Measurement Thresholds 3-11 How the Thresholds Work 3-12 Measure Discharge Voltage 3-12 Make Measurements 3-12 Typical Display 3-13 Measure DC Voltage 3-14 Set Measurement Range 3-14 Save DC Voltage Readings 3-14 Measure AC Voltage 3-15 Measurement Range 3-15 Save AC Voltage Readings 3-15 Measure Ripple Voltage 3-16 Set Measurement Range 3-16 Save Ripple Voltage Readings 3-16 Measure Voltage with TL175 3-17 4 Use the BTL20 Interactive Test Probe 4-1 Introduction 4-1 BTL20 Overview 4-1 Connect the Probe to the Product 4-2 Set the Audio 4-2 Turn On/Off Power 4-2 Understand the Display 4-3 Long and Short Extenders 4-4 Replace the Probe Tips 4-5 Zero Calibration 4-6 5 View Memory 5-1 Introduction 5-1 View Data Saved in Meter Mode 5-1 Delete Data Saved in Meter Mode 5-2 View Profiles Saved in Sequence Mode 5-3 Delete Profiles Saved in Sequence Mode 5-3 6 Connection to PC 6-1 Introduction 6-1 Connect the Product to PC 6-1 ii MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664