Fluke TIX640 Product Manual - Page 34
Ethernet Cable and AC Adapter, AC Adapter Connection, Operation with Breakout Box
View all Fluke TIX640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TiX620, TiX640, TiX660, TiX1000 Users Manual Ethernet Cable and AC Adapter The Ethernet cable is used in order to connect the thermography camera to the 8-pin LEMO socket (lefthand side, blue mark). The 14-pin connector of the ac adapter is plugged into the right-hand side LEMO socket with the red mark pointing to the top. See Figure 1-2. AC Adapter Connection To operate while permanently connected to a notebook or PC, the power should be supplied using the ac adapter (see Figure 1-3) with the 14-pin LEMO connector on right-hand side socket. Ethernet AC Adapter hvh057.eps Figure 1-2. Ethernet Cable and AC Adapter 1-28 Figure 1-3. AC Adapter hvh058.eps When the ac adapter is connected, the camera is automatically supplied by the ac adapter and no longer by the rechargeable battery. However, the rechargeable battery is not charged at the same time. Operation with Breakout Box Using the breakout box will expand the connection options of the thermal imager, see Table 1-8. The interfaces 2 x analog output, 2 x trigger E/A, PAL/NTSCFBAS, as well as the digital RS232 interface are accessible via the breakout box. MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664