Fluke VT04 Manual - Page 14
Rechargeable Battery
View all Fluke VT04 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
VT02, VT04 Users Manual Rechargeable Battery The VT04 has a rechargeable Li-ion battery. Note New batteries are not fully charged. Two to ten normal charging/discharging cycles may be required before the battery charges to its maximum capacity. Before using the VT04 for the first time, charge the battery: 1. Plug the ac power supply into an ac wall outlet. 2. Connect the micro-USB connector to the VT04. See Figure 2. While the battery is charging, shows on the display and the status LED is red. When charged, shows on the display and the status LED is green. The typical charge time from 100 % discharged to 100 % charge is 5 to 6 hours. Note Make sure the Product is near room temperature before you connect it to the charger. See the charging temperature specification. Do not charge in hot or cold places. Charging in extreme temperatures reduces the battery pack's ability to hold a charge. Figure 2. Rechargeable Battery hak18.eps MyFlukeStore S6hop for Fluke products online at: www. .com 1.877.766.5412