Foxconn 45CSX English Manual. - Page 31

Memory Configuration CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. Memory Configuration Memory Configuration Help Item DRAM Frequency [Auto] Options Auto 400 MHz 533 MHz 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► DRAM Frequency This item is used to set DRAM frequency. Setting values are: [Auto], [400 MHz], [533 MHz]. DRAM Timing Configuration CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. DRAM Timing Configuration DRAM Timing Configuration Configure DRAM Timing by SPD [Enabled] Help Item Options Disabled Enabled Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Configure DRAM Timing by SPD This item is used to enable/disable provision of DRAM timing by SPD device. The Serial Presence Detect (SPD) device is a small EEPROM chip, mounted on a DDR2 memory module. It contains important information about the module's speed, size, addressing mode and various other parameters, so that the motherboard memory controller (chipset) can better access the memory device. Select [Enabled] for SPD enable mode. Select [Disabled] to set the parameters by yourself. 24