Foxconn 8500GT-128R3 OC60.. English manual - Page 10

Chapter 1 Installation Instructions Install the Graphics Card Step1. Shut down your computer and unplug the system power cord. Step2. Take the case cover off. If there is any Graphics Card, please remove them. Step3. Take the Graphics Card out from the static-proof bag and install it on the motherboard carefully Step4. Put on the case cover and connect the monitor or TV cables to the rear Video output port of the Graphics Card. Step5. Reboot your PC. Attention: 1. Be sure to unplug the AC power cord before adding or removing Graphics Cards otherwise your motherboard or the Graphics Cards might be seriously damaged. 2. Ensure you insert the Graphics Card in the correct slot. PCI-Express cards differ from AGP cards, Make sure that you locate the correct slot, otherwise you could cause damage to your PC. 3.To avoid damage from static electricity, make sure that you have discharge the static electricity before installation. 4. Some Graphics Cards have an additional power connect; if your Graphics Card has one, make sure that the connect is connected with the power supply, or the Graphics Card may not work properly! 4