Foxconn A7VMX-K English Manual. - Page 44
► Parallel Port Mode
View all Foxconn A7VMX-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
3 SuperIO Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. SuperIO Configuration SuperIO Configuration Help Item Onboard Floppy Controller Serial Port1 Address IR Address IR Mode I IR Duplex Mode Parallel Port Address Parallel Port Mode Parallel Port IRQ [Enabled] Allows BIOS to Enable [3F8/IRQ4] or Disable Floppy [2F8/IRQ3] Controller. [IrDA] [Half Duplex] [378] [Normal] [IRQ7] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Onboard Floppy Controller This item is used to enable/disable Floppy Controller. ► Serial Port 1 Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port . ► IR Address This item is used to assign the I/O address and interrupt request (IRQ) for the IR port. ► IR Mode This item is used to set the IR mode. The available settings are : [IrDA] : An IrDA device for maximum 115200 bit/s. [ASK IR] : A faster IrDA for 1152000 bit/s. ► IR Duplex Mode This item enables you to determine the infrared function of the onboard infrared chip. ► Parallel Port Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard parallel port . ► Parallel Port Mode This item is used to set parallel port mode. ► Parallel Port IRQ This item is used to assign interrupt request (IRQ) for the onboard parallel port . 37