Foxconn A88GA English Manual. - Page 46
PC Health Status
View all Foxconn A88GA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3 PC Health Status CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. PC Health Status Warning Temperature Shut Down Temperature Case Open Warning CPU Temperature System Temperature NB Temperature CPU Fan Speed System Fan Speed NB Fan Speed CPU Voltage DRAM Voltage HT Voltage +5.0V +12V CPU Smart Fan Function Off PWM Temperature Start PWM Temperature Start PWM Value Slope PWM Value Move Enter:Select [Disabled] Help Item [Disabled] [Disabled] Options :47 oC/116 oF :30 oC/86 oF Disabled :45 oC/113 oF 50 oC/122 oF :2213 RPM 55 oC/131 oF :N/A 60 oC/140 oF :N/A 65 oC/149 oF :1.344 V 70 oC/158 oF :1.596V 75 oC/167 oF :1.200V 80 oC/176 oF :4.919 V 85 oC/185 oF :11.713V 90 oC/194 oF [Enabled] [000] [035] [064] [2 PWM] +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Warning Temperature This option is used to set the warning temperature for the system. When the temperature of CPU is higher than the set value, the motherboard will send out warning beep. ► Shut Down Temperature This item is used to set the system temperature upper limit. When the temperature exceeds the set value, the system will shut down automatically. This function works only when your operating system is supporting ACPI. ► Case Open Warning This item is used to enable or disable case open warning function. ► CPU/System/NB Temperature The CPU/System/NorthBridge temperature are automatically detected and displayed by the system. ► CPU Fan/System Fan/NB Fan Speed The CPU fan/System fan/NB fan speed are automatically detected and displayed by the system. ► CPU Voltage / DRAM Voltage / HT Voltage / +5.0V / +12V The current voltages are automatically detected and displayed by the system. ► CPU Smart Fan Function / System Smart Fan Function / NB Smart Fan Function These options are used to enable or disable smart fan function. Set "CPU Smart Fan Function"/"System Smart Fan Function"/ "NB Smart Fan Function" to [Enabled], the following items will appear: ► Off PWM Temperature This item is used to set a off limit of temperature. The fan will stop when the temperature is lower than the off limit. You can input a value from 0 to 127, or change it by pressing / key. ► Start PWM Temperature This item is used to set a start limit of temperature. The fan will start to spin when the temperature exceeds the start limit. The default value is [035]. 39