Foxconn A88GML English Manual - Page 37

3 "Memory Speed Adjust". ► Memory Speed Adjust This item will appear only when the "Memory Speed Mode" is set to [Limit] or [Manual]. The available settings are: [800MHz], [1067MHz], [1333MHz], [1600MHz], [Auto]. ► Current DRAM Speed This item displays the current DRAM speed. ► GFX Engine Clock Override This item allows you to enable/disable GFX Engine Clock Override support. ► PCI Express Clock This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card speed. ► Spread Spectrum If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference) generated by the system, so to comply with FCC regulation. But if overclocking is activated, you had better disable it. Voltage Options CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Voltage Options Memory Voltage Control Current DRAM Voltage [Disabled] :1.596V Help Item Options CPU Voltage Control [Disabled] Current CPU Voltage :1.344V NB Voltage Control [Disabled] Disabled +50mV +100mV +150mV Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Memory Voltage Control This option is used to change the DRAM voltage in a step of 50mV. The voltage can be incremented from +50mV to +150mV. ► CPU Voltage Control This option is used to change the CPU voltage in a step of 25mV. The voltage can be incremented from +25mV to +375mV. ► NB Voltage Control This item is used to adjust North Bridge(NB) voltage. Adjusting the voltage beyond the NB default voltage could result in damage to NB. The default option is "Disabled". 30