Foxconn D70S-PD User manual - Page 15
Install the Memory, HARDWARE INSTALLATION
View all Foxconn D70S-PD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
204-Pin HARDWARE INSTALLATION 2-1 Install the Memory Read the following guidelines before you begin to install the memory : ■ Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage. ■ Memory modules have a foolproof design. A memory module can be installed in only one direction. If you are unable to insert the memory, switch the direction. If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated by a notch in the middle, so it can only fit in one direction. Follow the steps below to correctly install your memory modules into the sockets. Notch Step 1: Plug the pin side of the memory module into the socket slantwise, then press it down firmly. Step 2: The clips at both ends of the socket will snap into place when the memory moule is securely inserted and pressed. 8