Foxconn G41MD-V English Manual - Page 37

Smart BIOS CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. Smart BIOS Smart Power LED Smart Boot Menu Current CPU Speed Current FSB Speed Current CPU Multiplier Current DRAM Speed [Enabled] Help Item [Enabled] : 2.50GHz Options : 1333MHz : 7.5 Disabled : 800MHz Enabled 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Smart Power LED Smart Power LED is a feature built on your motherboard to indicate different states during Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state by different long-short blinking intervals. You can always leave this state enabled. System Status Normal No Memory Post Error Message Power LED Status Always On Continue blinking On (1sec.), Off (1sec.) Quick blinking twice (1/3sec. On, 1/3sec. Off), one long On (1sec.), continuously. Stop Blinking Condition Always On Reboot & Memory OK Enter Setup or Skip ► Smart Boot Menu When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. This also prevents user without password trying to get into your computer through smart boot menu. ► Current CPU Speed This item displays the current CPU speed. ► Current FSB Speed This item displays the current Front Side Bus clock. ► Current CPU Multiplier This item displays the current CPU Ratio. ► Current DRAM Speed This item displays the current DRAM Speed. 30