Foxconn G41S English Manual. - Page 34
► DRAM Frequency, ► Memory Timing by SPD, ► Memory Hole, ► Initial Graphics Adapter, ► IGD Graphics - manual
View all Foxconn G41S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3 OS and 4gb of RAM. Basically it allows you to remap the overlapped PCI memory above the total physical memory. ► DRAM Frequency This item is used to adjust the DRAM frequency. Select [Auto] for SPD enable mode. You also can select a value manually such as [667 MHz] or [800 MHz]. ► Memory Timing by SPD This item is used to enable/disable provision of DRAM timing by SPD device. The Serial Presence Detect (SPD) device is a small EEPROM chip, mounted on a memory module. It contains important information about the module's speed, size, addressing mode and various other parameters, so that the motherboard memory controller (chipset) can better access the memory device. ► Memory Hole This item is used to determine whether the 15M-16M address field of memory is reserved for the ISA expansion card. ► Initial Graphics Adapter This item is used to choose the initial graphics controller which will be used as the primary boot device. ► IGD Graphics Mode Select This item is used to select the amount of system memory used by internal graphics device. ► PEG Port This item is used to enable/disable PCI Express graphics port. 27