Foxconn T20-H3 Manual - Page 17
Install the CPU Cooler
View all Foxconn T20-H3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Install the CPU Cooler Follow the steps below to correctly install the CPU cooler on the motherboard. 2 CAUTION 1. Apply and spread an even thermal grease on the surface of CPU. 2. Place the four bolts of the CPU cooler to the holes of the motherboard, push them straight down from the top, and the bolts will be fastened on the motherboard. That's it. 3. Check the solder side of the motherboard, the push pin should be fixed as depicted in the picture. 4. Attach the 4-wire CPU cooler connector to the CPU FAN header on the motherboard . 3 2 1 Release bolts of CPU cooler from motherboard : 1.Turning the push pin (bolt) along with the direction of arrow (counterclockwise). 2. Pull the push pin straight up. 3. Turning push pin clockwise to its default position. ! Use extreme care when removing the CPU cooler because the thermal grease may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU. 10