Frigidaire FAFI15D7MN Complete Owner's Guide - Page 5

Auto-Off As a safety feature, the auto-off function will turn off the heat to the soleplate if the iron is not moved within a certain amount of time. If the iron is placed on the soleplate or either side without movement, then the heat will turn off after 30 seconds. If the iron is placed on the heel rest without movement, then the heat will turn off after 15 minutes. The Off Indicator will flash to indicate that the iron has entered into the Auto-Off mode and that no heat is being supplied to the soleplate. To resume use of the iron after it has entered into the Auto-Off mode, initiate movement of the iron. Depending on how long the iron has been in the AutoOff mode, you may need to allow it to heat back up. The Ready Indicator will illuminate when the iron has heated back up to the previously set fabric selection. If the iron is left in the Auto-Off mode, it will shut off completely after 5 minutes of entering the Auto-Off mode. WARNING The Auto-Off function is designed as a safety feature and should not be used as the primary method of turning off the iron. The "Using Your Iron" section contains information on properly turning off the iron. Non-Drip System The iron is capable of generating steam, even at reduced temperatures, without water drips, sputters, or leaks coming through the soleplate steam holes. Vertical Steam The iron is capable of being used as a garment steamer using the Steam Burst/Vertical Steam Button. Anti-Calcium System The iron contains an anti-calcium system that reduces calcium accumulation on the soleplate by removing calcium from the water inside the reservoir. 5