Frigidaire FAFS4474LW Complete Owner's Guide (English) - Page 15
Cycle Settings - energy usage
UPC - 012505382284
View all Frigidaire FAFS4474LW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
OPERATING INSTRUCTIONS Cycle Settings For best results Follow the fabric care label instructions on items to be dried. Appropriate wash temperature, spin speeds, soil level and options will automatically be displayed for each cycle. The settings can be changed before the cycle is started. WASH WATER TEMPERATURE To change the preset temperature, press the Temp button to scroll to the desired setting. Select a wash water temperature according to fiber content, colorfastness and soil level. A cold water rinse saves energy and reduces wrinkling. To protect your fabrics, not all temperatures are available with every cycle. The indicator will not light if the setting is not available with that cycle. The temperature selected for the cycle will be remembered and recalled each time that cycle is selected in the future. To return to factory settings, press these two buttons at the same time and hold until the signal sounds. Í NOTE This setting has been certified by NSF International, an independent third party testing and certification organization dedicated to public health, safety and environmental protection. NSF Protolcol P172 Sanitization Performance of Residential and Commercial, Family-Sized Clothes Washers Auto Temp Hot Use this setting for heavily soiled white or colorfast cottons and blends. Auto Temp Warm Use this setting for normally soiled white or colorfast cottons or blends. Auto Temp Cold Some warm water will automatically blend with cold tap supply to achieve a precise Auto Temp Cold. Use this setting for lightly soiled non-colorfast items, knits, delicates, and hand washables. Cold Water Clean Wash and rinse temperatures are equivalent to temperature of cold tap supply. Use this selection for fabrics and colors that are prone to dye transfer. For use with cold water detergents. Í NOTE To change the temperature once the cycle has begun, press the Pause button, make the new selection and press Start again. Auto Temp wash water temperatures are automatically regulated to maximize detergent effectiveness and improve washing performance. The water heater setting and its distance from the washer, water usage in other parts of the home, and seasonally low ground water temperature in some geographic areas can affect water temperature. Sanitize This setting sanitizes heavily soiled colorfast fabrics such as towels, bedding, and children's clothing by killing 99.9% of bacteria using wash water heated with a boost heater to 152° F (67° C). Cold water is used to cool and rinse the load. SPIN SPEED Max, High, Medium and Low spin speeds are available for each cycle. The spin speed and/or duration of final spin vary from model to model and cycle to cycle. Increasing the spin speed will extract more water, decrease drying time and conserve energy. Decreasing the spin speed will reduce wrinkling. Select Low spin speed to gently spin items that should be line dried. Use No Spin to omit the final spin at the end of the cycle. The load will be very wet. Remove items from the wash drum to drip dry or select a Spin Only or Rinse and Spin cycle to remove excess water at a more convenient time. SOIL LEVEL Adjust the wash time in 3-minute increments based on the soil level of each load. Max, Heavy, Normal, Light and Extra Light soil levels are available. 15