Frigidaire FAH096M2T Owners Guide - Page 7
Air Conditioner Features
View all Frigidaire FAH096M2T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Air Conditioner Features Automatic Thermostat (some models) (continued) When a COOL or HEAT (some models) setting is selected, the thermostat controls the amount of cooling or heating by automatically turning the cooling compressor or heater on and off in response to the room temperature. Set the thermostat at the highest number for the coldest setting for cooling, and the lowest number for warmer settings in the HEAT mode. Once the room has reached the desired temperature, adjust the thermostat to a number providing the most comfortable amount of cooling or heating. Higher numbers provide lower room temperatures. Lower numbers provide warmer room temperatures. Night Time Cooling When outside temperatures drop below 70°F (21°C) and the unit is cooling, frost may form on the coils and block airflow into the room. If this occurs, operate the air conditioner on the FAN setting (or CONSTANT FAN/HIGH on Energy Saver models) to defrost the coil. If cooling while the outside temperature is low, set the thermostat to the middle position. Make sure the louvers are open. This will help prevent frost build-up. Figure 1 (OFF) Figure 2 (FRESH AIR) Fresh Air Vent Control The Fresh Air Vent allows the air conditioner to recirculate inside air (OFF), draw air into the room (FRESH-AIR) or exhaust stale air to the outside (VENT). See Figures 1, 2 & 3 for this operation. • The "OFF" position is used when MAXIMUM cooling is desired. It may also be for room air re-circulation without cooling when the selector switch is set to the FAN position, this will also filter the room air. • The FRESH-AIR position allows outside air to be drawn into the room to refresh the inside room air. • The VENT-position removes stale air from the room and exhausts it to the outside. • Any vent position can be used with any fan selection. Figure 3 (VENT) 7