Frigidaire FAQ055S7A Use and Care Manual - Page 6

4D Air Conditioner Features (continued) TO CHANGE TEMPERATURE SETTING: ' Th Hoot Cool EntowSeWitt Fan Gray Low • ta 4'7 DO THIS: PRESS TO RAISE PRESS TO LOWER YOU WILL SEE: Heat Cool Energy Sei Fen Only i) Chown Air Note: Tap or hold either up (A) or down ( y) button until the desired temperature is seen on the display. This temperature will be automati- cally maintained anywhere between 60°F (16°C) and 90°F (32°C) for cooling mode. The temperature will be automatically maintained anywhere between 55°F (13°C) and 80°F (27°C) for heating mode. If you want the display to read the actual room temperature. See "To Operate on Fan Only" section on Page 7. TO ADJUST FAN SPEEDS: Coot EnArgy Sarni Fen OrdY Auto Aied Low DO THIS: PRESS TO SELECT YOU WILL SEE : COQ, Energy Saver Fon Only 0 LIGHT On Pl TO USE AUTO FAN FEATURE: YOU WILL SEE: LIGHT On Cool &orgy Sewn ran t)nly 7iiimannwor 0 Chew* Filter TOM:OTTO, 13 6,100P • • Throw Clown Air DO THIS: PRESS FAN BUTTON SELECT AUTO Coot Enorgy Sgvw Fan Only O Choc Allier =Z: r ■ L lle Wont • Fen Spited 0 Clown Alr Note: Fan speed starts at High Speed and adjusts to a slower speed as the room temperature dictates, For example if the room doesn't get too warm, it will stay at the slowest speed. If the room temperature rises quickly,such as a door being opened, it will automatically go to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature. 6 4D