Frigidaire FAQE7011LW Installation Instructions (All Languages) - Page 20
Reassembling the door
![]() |
UPC - 012505382345
View all Frigidaire FAQE7011LW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
REVERSING DOOR Reassembling the door 1 Locate and remove the hinge cutout gate from the outer door assembly. Rotate and move it to the opposite hole in the outer door. 3 Replace indented head screws (no. 1-5) removed earlier. Take care not to strip out the plastic holes. 4 Replace pan head screws (no. 6-7) removed earlier. Take care not to strip out the plastic holes. no. 1-5 no. 6-7 2 Rest the opening of the inner door at a 90 degree angle on the "shoulders" of the hinge cutout gate. Pivot the inner door down onto the outer door. 5 Locate new metal strike supplied with dryer manuals. Grip new strike with pliers as shown below. Firmly insert the strike so it is oriented vertically. 20
![](/manual_guide/products/frigidaire-faqe7011lb-installation-instructions-languages-cd8f01e/20.png)
20
REVERSING DOOR
no. 6-7
no. 1-5
3
Replace indented head screws (no. 1-5) removed
earlier. Take care not to strip out the plastic holes.
4
Replace pan head screws (no. 6-7) removed earlier.
Take care not to strip out the plastic holes.
5
Locate new metal strike supplied with dryer
manuals. Grip new strike with pliers as shown
below. Firmly insert the strike so it is oriented
vertically.
1
Locate and remove the hinge cutout gate from the
outer door assembly. Rotate and move it to the
opposite hole in the outer door.
2
Rest the opening of the inner door at a 90 degree
angle
on the “shoulders” of the hinge cutout gate.
Pivot the inner door down onto the outer door.
Reassembling the door