Frigidaire FAQG7001LB Installation Instructions (All Languages) - Page 20
Reassembling the door
View all Frigidaire FAQG7001LB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
REVERSING DOOR Reassembling the door 1 Locate and remove the hinge cutout gate from the outer door assembly. Rotate and move it to the opposite hole in the outer door. 3 Replace indented head screws (no. 1-5) removed earlier. Take care not to strip out the plastic holes. 4 Replace pan head screws (no. 6-7) removed earlier. Take care not to strip out the plastic holes. no. 1-5 no. 6-7 2 Rest the opening of the inner door at a 90 degree angle on the "shoulders" of the hinge cutout gate. Pivot the inner door down onto the outer door. 5 Locate new metal strike supplied with dryer manuals. Grip new strike with pliers as shown below. Firmly insert the strike so it is oriented vertically. 20
20
REVERSING DOOR
Reassembling the door
no. 6-7
no. 1-5
1
Locate and remove the hinge cutout gate from the
outer door assembly. Rotate and move it to the
opposite hole in the outer door.
2
Rest the opening of the inner door at a 90 degree
angle
on the “shoulders” of the hinge cutout gate.
Pivot the inner door down onto the outer door.
3
Replace indented head screws (no. 1-5) removed
earlier. Take care not to strip out the plastic holes.
4
Replace pan head screws (no. 6-7) removed earlier.
Take care not to strip out the plastic holes.
5
Locate new metal strike supplied with dryer
manuals. Grip new strike with pliers as shown
below. Firmly insert the strike so it is oriented
vertically.