Frigidaire FAQG7011LB Installation Instructions (All Languages) - Page 19
Reversing the hinge
UPC - 012505382536
View all Frigidaire FAQG7011LB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Reversing the hinge 1 Carefully pull out the 2 small round hole plugs from the front panel and save. Remove and save the square "T" slot cover by sliding it up and pulling it out. Move all 3 plugs to the opposite side of the front panel and insert. ROUND PLUG REVERSING DOOR 4 From the back side of the inner door, pinch the retaining tabs of the plastic square plug to release it. Save square plug for reinstallation. SQUARE PLUG ROUND PLUG 2 Turn inner door assembly over to expose retaining tabs of metal strike. Grip tabs fully with pliers to remove. Discard old metal strike. 5 Carefully remove the 2 round plugs from the inner door and move them to the opposite holes and reinstall. OUT IN 3 Turn the inner door assembly back over and locate the 2 pan head hinge screws. Remove and save the 2 screws and separate the hinge from inner door assembly. HINGE SCREWS 6 Rotate the hinge and move it to the opposite side of the inner door. Attach it with the 2 pan head screws removed previously. Reinstall plastic plug in the square hole next to the hinge. 19