Frigidaire FAQG7021LW Installation Instructions (All Languages) - Page 20
Reassembling the door
![]() |
UPC - 012505383427
View all Frigidaire FAQG7021LW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
REVERSING DOOR Reassembling the door 1 Lift the inner glass ring. Rotate it 180 degrees, reinstall on outer door, lining up indicators - "LH" for left-hand hinge or "RH" for right-hand hinge. 3 Replace indented head screws (no. 1-5) removed earlier. Take care not to strip out the plastic holes. 4 Replace pan head screws (no. 6-7) removed earlier. Take care not to strip out the plastic holes. no. 1-5 no. 6-7 2 Rest the opening of the inner door at a 90 degree angle on the supports for the hinge cutout cover. Pivot the inner door down onto the outer door. 5 Locate new metal strike supplied with dryer manuals. Grip new strike with pliers as shown below. Firmly insert the strike so it is oriented vertically. 20
![](/manual_guide/products/frigidaire-fasg7074la-installation-instructions-languages-672659d/20.png)
20
REVERSING DOOR
Reassembling the door
no. 6-7
no. 1-5
1
Lift the inner glass ring. Rotate it 180 degrees,
reinstall on outer door, lining up indicators - “LH”
for left-hand hinge or “RH” for right-hand hinge.
2
Rest the opening of the inner door at a 90 degree
angle on the supports for the hinge cutout cover.
Pivot the inner door down onto the outer door.
3
Replace indented head screws (no. 1-5) removed
earlier. Take care not to strip out the plastic holes.
4
Replace pan head screws (no. 6-7) removed earlier.
Take care not to strip out the plastic holes.
5
Locate new metal strike supplied with dryer
manuals. Grip new strike with pliers as shown
below. Firmly insert the strike so it is oriented
vertically.