Frigidaire FASE7073LA Complete Owner's Guide (English) - Page 13

Cycle Options, continued Wrinkle Release Select Wrinkle Release if the dried load might not be removed promptly at the end of the cycle. The dry load will continue tumbling without heat to help reduce wrinkling. When Chime is selected, a beep will be heard periodically. The load may be removed any time during Wrinkle Release. Line Dry Select this option to simulate hanging your laundry in a summer breeze combined with the wrinkle-releasing benefits of tumble action. Since drying times are calculated with the dryer's automatic moisture sensors and heat is radically reduced or eliminated, cycle time will be lengthened. As a result, depending on moisture content of load, overall energy consumption decreases. Available on Mixed Load (on select models), Normal, Casual, Jeans (on select models), and Delicates. Delay Start Press Delay Start to select a drying time convenient to your schedule or during off peak energy hours. The delay time selected will be displayed and begin counting down when you select Start. Í NOTE While counting down during Delay Start, you will notice your dryer periodically tumbling for a few minutes without heat to redistribute the load, maximizing load freshness. Chime (Press & Hold on some models) A signal will sound at the end of the cycle (and periodically during Wrinkle Release) if this option is selected. Anti Static (on select models) The Anti Static option injects steam into the clothing just before cycle completion to reduce static. Shrink Guard (on select models) Select Shrink Guard to lower the initial drying temperature to protect fabrics from overdrying. Control Lock To lock the controls between cycles, press and hold the Control Lock button for 5 seconds. Repeat to unlock the controls when you are ready to operate the dryer. Use this feature to reduce the likelihood of accidental operation by children. OPERATING INSTRUCTIONS ultra capacity sanitize high normal low air dry max high normal low damp wrinkle release line dry delay start chime shrink guard control lock ready steam system sanitize high normal low air dry max high normal low damp 90 75 60 30 touch up wrinkle release line dry delay start add steam anti static control lock ready steam system sanitize high normal low air dry max high normal low damp 90 75 60 30 touch up wrinkle release line chime dry delay start shrink guard anti static control lock 13