Frigidaire FASG7021NW Complete Owner's Guide (English) - Page 7

Important, Caution

Page 7 highlights

OPERATING INSTRUCTIONS Operating Your Dryer, continued 2 Check that the lint filter is clean and in place. CAUTION Do not operate dryer without lint filter in place. 3 Load the dryer and close the door. • Load items loosely. The average wet load will fill the drum 1/3 to 1/2 full. Items need room to tumble freely for even drying and less wrinkling. • If desired, place a dryer fabric softener sheet on top of the load at the beginning of the cycle. • To save energy and time and avoid uneven drying and wrinkling, do not overload the dryer. • When drying large items, dry only two or three items at a time. Fill out the load with small and medium sized items. • For delicate or very small loads, add two or three similar items to improve tumbling action. 4 Select the appropriate cycle and settings for each load. Í NOTE Over-drying can cause wrinkles, shrinkage, lint, harshness and a build up of static electricity. • Turn the cycle selector knob in either direction to select the cycle desired. • The estimated drying time for Auto Dry cycles or the actual drying time for Timed Dry cycles will be displayed. • A suitable drying temperature, dryness level and options will automatically be indicated for the cycle selected. See the "Dryer Settings Chart" for more details. • To change the drying temperature and dryness level, press the temp or dry level buttons to scroll to the desired settings. • To select or delete an option, press options; then, while the indicator is blinking, press select. The indicator will light when the option has been selected. It will no longer be lighted when the option has been deleted. Í NOTE If a setting is not available for the cycle selected, the indicator will not light. • Adjustments made to a cycle will be remembered and recalled each time that cycle is selected in the future. To return to factory settings, press these two buttons at the same time and hold until the signal sounds. 5 Start the cycle. • To add or remove items when the dryer is running, open the door. The dryer will stop when the door is opened. Allow the drum to come to a complete stop before reaching inside. • Close the door and press START to resume the cycle. Í NOTE If drying a single large or bulky item, such as a comforter, remove the item part way through the cycle and turn it "inside out" to maximize drying effectiveness. Place item back in dryer and re-start cycle. 6 When the cycle ends, remove items immedi- ately and hang or fold. IMPORTANT Clean the lint filter after every load. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

7
OPERATING INSTRUCTIONS
IMPORTANT
Clean the lint
lter after every load.
2
Check that the lint
lter is
clean and in place.
Í
NOTE
Over-drying can cause wrinkles, shrinkage, lint,
harshness and a build up of static electricity.
Í
NOTE
If a setting is not available for the cycle selected, the
indicator will not light.
3
Load the dryer and close the door.
• Load items loosely. The average wet load will
ll the drum 1/3 to 1/2 full. Items need room to
tumble freely for even drying and less wrinkling.
• If desired, place a dryer fabric softener sheet on
top of the load at the beginning of the cycle.
• To save energy and time and avoid uneven drying
and wrinkling, do not overload the dryer.
• When drying large items, dry only two or three
items at a time. Fill out the load with small and
medium sized items.
• For delicate or very small loads, add two or three
similar items to improve tumbling action.
4
Select the appropriate cycle and settings for
each load.
• To change the drying temperature and dryness
level, press the
temp
or
dry level
buttons to scroll
to the desired settings.
• To select or delete an option, press
options
; then,
while the indicator is blinking, press
select
. The
indicator will light when the option has been se-
lected. It will no longer be lighted when the option
has been deleted.
• Adjustments made to a cycle will be remembered
and recalled each time that cycle is selected in the
future.
• Turn the cycle selector knob in either direction to
select the cycle desired.
• The estimated drying time for Auto Dry cycles or
the actual drying time for Timed Dry cycles will be
displayed.
• A suitable drying temperature, dryness level and
options will automatically be indicated for the cycle
selected. See the “Dryer Settings Chart” for more
details.
Operating Your Dryer, continued
5
Start the cycle.
• To add or remove items when the dryer is running,
open the door. The dryer will stop when the door
is opened. Allow the drum to come to a complete
stop before reaching inside.
• Close the door and press
START
to resume the cycle.
6
When the cycle ends, remove items immedi-
ately and hang or fold.
Í
NOTE
If drying a single large or bulky item, such as a
comforter, remove the item part way through the cycle
and turn it “inside out” to maximize drying effectiveness.
Place item back in dryer and re-start cycle.
CAUTION
Do not operate dryer without lint
lter in place.
To return to factory
settings, press these
two buttons at the
same time and
hold until the signal
sounds.