Frigidaire FAX054P7A Use and Care Manual - Page 8

Additional Things You Should Know - circuit

Page 8 highlights

Air Conditioner Features (continued) TO TURN UNIT OFF: DO THIS: PRESS ON/ OFF BUTTON FAU LT CODES If the display reads "AS", a sensor has failed. Contact your Authorized Frigidaire Service Center If the display reads "ES", a sensor has failed. Contact your Authorized Frigidaire Service Center ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. • The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time. • The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees. • The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other and back, press and hold the "TEMP/TIMER" Up ( ) and Down ( ) buttons together for 3 seconds. (2-WAY) AUGER WHEEL Air Directional Louvers Air directional louvers control air flow direction. Your air conditioner has the louver type described below. Auger Type Rotate the Auger Wheels until the desired Left/Right direction is obtained. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

(2-WAY)
AUGER WHEEL
Air Conditioner Features
(continued)
TO TURN UNIT OFF:
DO THIS:
PRESS ON/
OFF BUTTON
Air Directional Louvers
Air directional louvers control air flow direction. Your air conditioner has the louver type
described below.
Auger Type
Rotate the Auger Wheels until the desired Left/Right direction is obtained.
FAU LT CODES
If the display reads “AS”, a sensor
has failed. Contact your Authorized
Frigidaire Service Center
If the display reads “ES”, a sensor
has failed. Contact your Authorized
Frigidaire Service Center
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other and back,
press and hold the “TEMP/TIMER” Up (
) and Down (
) buttons together for 3 seconds.
The “Cool” circuit has an automatic 3 minute time delayed start if the unit is turned off and on
quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The
fan will continue to run during this time.
8