Frigidaire FCCG3027AS Complete Owners Guide - Page 17
Cleaning the burner heads
View all Frigidaire FCCG3027AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Cleaning the burner heads To avoid possible burns, do not attempt cleaning before turning off all surface burners and allowing them to cool. Any additions, changes, or conversions required in order for this appliance to satisfactorily meet the application needs must be made by an authorized qualified Agency. Routinely clean the cooktop. Wipe with a clean, damp cloth and wipe dry to avoid scratches. Keeping the surface burner head ports and slots clean will prevent improper ignition and an uneven flame. To clean recessed and contoured areas of cooktop: • If a spill occurs on or in the recessed or contoured areas, blot up spill with an absorbent cloth. • Rinse with a clean, damp cloth and wipe dry. 17 CARE AND CLEANING Burner Cap Burner Head Orifice Holder Ignitor CAUTION To avoid possible burns do not attempt to operate the surface burners without the burner caps. Do not use spray oven cleaner on the cooktop. To clean burner heads: 1. Remove the burner cap and burner head (see Figure 14). Clean the cap and head with hot soapy water and dry thoroughly. 2. For burned-on and dried spills, apply hot soapy water to the burner cap and head to allow time for the soils to soften. 3. Use a toothbrush to clean all over the burner head. 4. Wipe the burner cap and head clean with a soft, clean cloth, sponge, or scratch-free cleaning pad. Wipe out burner orifice with a cloth before placing burner head and cap back on. The burner assembly must be completely dry before use. 5. Make sure the burner caps and heads are placed and seated properly over the ignitor. The three mounting legs on burner will align with slots on the orifice holder. When placed correctly, the burner cap should not move off the burner head (see "Assembly of the Burner Caps" on page 9). 6. If burner fails to light, recheck placement of burner head to the orifice holder and cap. Figure 14: Removeable burner components Important notes: • Always keep the surface burner caps in place whenever a surface burner is in use. • When replacing the burner caps, be sure the burner caps are seated firmly on top of the burner heads. • For proper flow of gas and ignition of burners do not allow spills, food, cleaning agents, or any other material to enter the gas orifice port opening.