Frigidaire FCWD3027AB Installation Instructions - Page 6

Model and Serial Number Location

Page 6 highlights

ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS (with cooktop combination installations) If oven is used in a new branch circuit installation (1996 NEC), mobile home, recreational vehicle, or where local codes DO NOT permit grounding through the neutral (white) wire, the appliance frame MUST NOT be connected to the neutral wire of the 4-wire electrical system (see Figure 5): 1. Disconnect the power supply. 2. Separate the green (or bare copper) and white appliance cable wires. 3. In the junction box: connect appliance and power supply cable wires as shown in Figure 5. Cable from Power Supply Ground Wire Red Wires White Wire Ground Wire (Bare or Green Wire) Junction Box Cable from appliance Black Wires White Wire U.L.-Listed Conduit Connector (or CSA listed) Figure 5 4-WIRE GROUNDED JUNCTION BOX Model and Serial Number Location The serial plate is visible when the door is opened. When ordering parts for, or making inquires about your oven, always be sure to include the model and serial numbers and a lot number or letter from the serial plate on your oven. Single Wall Oven Serial Plate Location Double Wall Oven Serial Plate Location Figure 6 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

6
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
(with cooktop combination installations)
Model and Serial Number Location
The serial plate is visible when the door is opened.
When ordering parts for, or making inquires about your
oven, always be sure to include the model and serial
numbers and a lot number or letter from the serial plate
on your oven.
Single Wall Oven
Serial Plate Location
Double Wall Oven
Serial Plate Location
If oven is used in a new branch circuit installation
(1996 NEC), mobile home, recreational vehicle, or
where local codes DO NOT permit grounding through
the neutral (white) wire, the appliance frame MUST
NOT be connected to the neutral wire of the 4-wire
electrical system (see Figure 5):
1. Disconnect the power supply.
2. Separate the green (or bare copper) and white
appliance cable wires.
3. In the junction box:
connect appliance and power supply cable wires as
shown in Figure 5.
Figure 5
4-WIRE GROUNDED JUNCTION BOX
Cable from Power Supply
White Wire
Junction Box
Cable from appliance
White Wire
Black
Wires
Red
Wires
Ground Wire
Ground Wire
(Bare or Green
Wire)
U.L.-Listed
Conduit Connector
(or CSA listed)
Figure 6