Frigidaire FCWM2727AB Installation Instructions - Page 1
Frigidaire FCWM2727AB Manual
View all Frigidaire FCWM2727AB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
MICROWAVE/ WALL OVEN COMBINATION INSTALLATION INSTRUCTIONS INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER. IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. United States and Canada FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Your new wall oven has been designed to fit a limited variety of cutout sizes to make the job of installing easier. The first step of your installation should be to measure your current cutout dimensions and compare them to the cutout dimensions chart below for your model. You may find little or no cabinet work is necessary. Do not remove spacers (if equipped) on the side walls and/or on the back of the built-in oven. These spacers center the oven in the space provided. The oven must be centered to prevent excess heat buildup that may result in heat damage or fire. 1" (2.5 cm) Min.. I Electrical Junction Box C F G Hole for Cable B E H Door Open (see note 2) A Spacer D ** 2" (5 cm) Wide Wood Spacer if Needed 2" (5.1 cm) Min. ** Suggested distance from floor is 11½" (29.2 cm). Minimum required distance is 4 ½" (11.4 cm) NOTES: 1. Allow at least 21" (53.3cm) clearance in front of oven for door depth when it is open. 2. Dimension G (cutout depth) is critical to the proper installation of the built-in oven. If the oven decorative trim does not butt against the cabinet verify dimension G to assure it is the required depth. 3. For a cutout height greater than H maximum, add 2" (5 cm) wide wood shims of appropriate height to each side of the opening under the appliance side rails. You can order a larger bottom trim through a service center. 4. If the junction box is below the oven, longer conduit cables are available through a service center. Figure 1: Product and Cutout Dimensions PRODUCT DIMENSIONS A B C D 27" (68.6 cm) 423/4" (108.6 cm) 245/8" (62.5 cm) 25" (63.5 cm) CUTOUT DIMENSIONS AND CABINET WIDTH F H Min. Max. G Min. Min. Max. 247/8" (63.2 cm) 251/4" (64.1 cm) 24" (61.0 cm) 411/4" (104.8 cm) 417/8" (106.5 cm) E 413/16" (104.6 cm) I Min. 271/8" (68.9 cm) All dimensions are stated in inches and (cm). Printed in USA 1 P/N 807611008 (01/2022) Rev. A English - pages 1-8 Español - páginas 9-16 Français - pages 17-24