Frigidaire FEF354GS Use and Care Manual - Page 7

Before Setting Surface Controls

Page 7 highlights

Before Setting Surface Controls ELEMENT ON Indicator Lights Your range is equipped with surface control indicator lights that will glow on your range- the ELEMENT ON indicator lights (See Fig. 1). Fig. 1 The ELEMENT ON located on the control panel and will glow when a surface element is turned ON. A quick glance at this indicator light after cooking is an easy check to be sure ALL surface controls are turned OFF. Using proper cookware The size and type of cookware used will influence the setting needed for best cooking results. Cookware should have flat bottoms that make good contact with the entire surface heating element (See Fig. 2). Check for flatness by rotating a ruler across the bottom of the cookware (See Fig. 3). Cookware Material Types The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are: ALUMINUM - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists staining & pitting). If aluminum pans slide across the ceramic cooktop, they may leave metal marks which will resemble scratches. Remove these marks immediately. COPPER - Excellent heat conductor but discolors easily. May leave metal marks on ceramic glass (see Aluminum above). STAINLESS STEEL - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining. CAST IRON - A poor heat conductor however will retain heat very well. Cooks evenly once cooking temperature is reached. Not recommended for use on ceramic cooktops. PORCELAIN-ENAMEL on METAL - Heating characteristics will vary depending on base material. Porcelain-enamel coating must be smooth to avoid scratching ceramic cooktops. GLASS - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it may scratch the glass. Fig. 2 Be sure to follow the recommendations for using proper cookware as illustrated in Figs. 2 & 3. For more information about the ceramic cooktop see "Cooktop Cleaning & Maintenance" in the General Care & Cleaning section. Fig. 3 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

7
Before Setting Surface Controls
ELEMENT ON Indicator Lights
Your range is equipped with surface control indicator lights that will glow on your
range— the
ELEMENT ON
indicator lights (See Fig. 1).
The
ELEMENT ON
located on the control panel and will glow when a surface
element is turned ON. A quick glance at this indicator light after cooking is an
easy check to be sure ALL surface controls are turned OFF.
Cookware Material Types
The cookware material determines how evenly and quickly heat is
transferred from the surface element to the pan bottom. The most
popular materials available are:
ALUMINUM -
Excellent heat conductor. Some types of food will
cause it to darken (Anodized aluminum cookware resists staining
& pitting). If aluminum pans slide across the ceramic cooktop,
they may leave metal marks which will resemble scratches.
Remove these marks immediately.
COPPER -
Excellent heat conductor but discolors easily. May
leave metal marks on ceramic glass (see Aluminum above).
STAINLESS STEEL -
Slow heat conductor with uneven cooking
results. Is durable, easy to clean and resists staining.
CAST IRON -
A poor heat conductor however will retain heat very
well. Cooks evenly once cooking temperature is reached. Not
recommended for use on ceramic cooktops.
PORCELAIN-ENAMEL on METAL -
Heating characteristics will
vary depending on base material. Porcelain-enamel coating must
be smooth to avoid scratching ceramic cooktops.
GLASS -
Slow heat conductor. Not recommended for ceramic
cooktop surfaces because it may scratch the glass.
Using proper cookware
Fig. 3
Fig. 2
The size and type of cookware used will influence the setting
needed for best cooking result
s.
Cookware should have flat
bottoms that make good contact with the entire surface heating
element (See Fig. 2). Check for flatness by rotating a ruler across
the bottom of the cookware (See Fig. 3).
Be sure to follow the
recommendations for
using
proper
cookware as
illustrated in Figs. 2 &
3. For more
information about the
ceramic cooktop see
“Cooktop Cleaning &
Maintenance” in the
General Care &
Cleaning
section.
Fig. 1